[Prism54-users] Re: init_module: No such device

[Wolfgang Miller-Reichling]

Wolfgang Miller-Reichling <wolle-tmp20030401@gmx.de> wrote:
 
> I'm trying to use today's cvs version with a Netgear WG511 on a Thinkpad
> 760E. Building the driver (gcc 3.3.2) works fine but insmod fails with
> the following message: 
> 
> root@thinkpad:~ # modprobe prism54
> /lib/modules/2.4.23-pre9/kernel/drivers/net/wireless/prism54/prism54.o:
> init_module: No such device Hint: insmod errors can be caused by
>     incorrect module parameters, including invalid IO or IRQ parameters.
> You may find more information in syslog or the output from dmesg
> /lib/modules/2.4.23-pre9/kernel/drivers/net/wireless/prism54/prism54.o:
> insmod
> /lib/modules/2.4.23-pre9/kernel/drivers/net/wireless/prism54/prism54.o
> failed
> /lib/modules/2.4.23-pre9/kernel/drivers/net/wireless/prism54/prism54.o:
> insmod prism54 failed
> 
> root@thinkpad:~ # dmesg | tail -4
> Loaded prism54 driver, version 1.0.2.2
> PCI: No IRQ known for interrupt pin A of device .
> eth1: could not install IRQ handler
> prism54: No devices found, driver not installed.
> 
> Any hints?

Hmm, no hints? Maybe I can give a few more: 
The card works (very unstable though) with the old ISL3890-0.1.0
release. It takes IRQ 5. So this is not (only?) a PCMCIA-PCI assignment
problem. 

Wolfgang