[Prism54-users] init_module: No such device

[Wolfgang Miller-Reichling]

Hi,

I'm trying to use today's cvs version with a Netgear WG511 on a Thinkpad
760E. Building the driver (gcc 3.3.2) works fine but insmod fails with
the following message: 

root@thinkpad:~ # modprobe prism54
/lib/modules/2.4.23-pre9/kernel/drivers/net/wireless/prism54/prism54.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
/lib/modules/2.4.23-pre9/kernel/drivers/net/wireless/prism54/prism54.o: insmod /lib/modules/2.4.23-pre9/kernel/drivers/net/wireless/prism54/prism54.o failed
/lib/modules/2.4.23-pre9/kernel/drivers/net/wireless/prism54/prism54.o: insmod prism54 failed

root@thinkpad:~ # dmesg | tail -4
Loaded prism54 driver, version 1.0.2.2
PCI: No IRQ known for interrupt pin A of device .
eth1: could not install IRQ handler
prism54: No devices found, driver not installed.

Any hints?

Wolfgang