[Prism54-users] Re: init_module: No such device

[Herbert Valerio Riedel]

On Sat, 2003-11-15 at 08:36, Wolfgang Miller-Reichling wrote:
> Wolfgang Miller-Reichling <wolle-tmp20030401@gmx.de> wrote:
>  
> > I'm trying to use today's cvs version with a Netgear WG511 on a Thinkpad
> > 760E. Building the driver (gcc 3.3.2) works fine but insmod fails with
> > the following message: 
> > 
> > root@thinkpad:~ # modprobe prism54
> > /lib/modules/2.4.23-pre9/kernel/drivers/net/wireless/prism54/prism54.o:
> > init_module: No such device Hint: insmod errors can be caused by
> >     incorrect module parameters, including invalid IO or IRQ parameters.
> > You may find more information in syslog or the output from dmesg
> > /lib/modules/2.4.23-pre9/kernel/drivers/net/wireless/prism54/prism54.o:
> > insmod
> > /lib/modules/2.4.23-pre9/kernel/drivers/net/wireless/prism54/prism54.o
> > failed
> > /lib/modules/2.4.23-pre9/kernel/drivers/net/wireless/prism54/prism54.o:
> > insmod prism54 failed
> > 
> > root@thinkpad:~ # dmesg | tail -4
> > Loaded prism54 driver, version 1.0.2.2
> > PCI: No IRQ known for interrupt pin A of device .
> > eth1: could not install IRQ handler
> > prism54: No devices found, driver not installed.
> > 
> > Any hints?
> 
> Hmm, no hints? Maybe I can give a few more: 
> The card works (very unstable though) with the old ISL3890-0.1.0
> release. It takes IRQ 5. So this is not (only?) a PCMCIA-PCI assignment
> problem. 

what does lspci -vv show for the device in question?

-- 
Herbert Valerio Riedel       /    Phone: (EUROPE) +43-1-58801-18840
Email: hvr@hvrlab.org       /    Finger hvr@gnu.org for GnuPG Public Key
GnuPG Key Fingerprint: 7BB9 2D6C D485 CE64 4748  5F65 4981 E064 883F 4142