[Prism54-devel] 3CRWE154G72

[Luis R. Rodriguez]

I believe the fullmac 3com card says "verion 1.0" and the softmac
"version 2".  Anyway, how did this go?

On 6/7/05, Cliff Rowley <cliffrowley at gmail.com> wrote:
> Jean-Baptiste Note wrote:
> 
> Oops, sent this direct instead of to the ml.
> 
> >Thanks for taking the time to do this.
> 
> No probs :)  I just worked it out about 30 seconds before your mail
> arrived ;-)
> 
> I've applied the patch to the fullmac driver, but it's still a no-go.
> I'm just about to add the other patch to the softmac driver and see how
> I go.  The dmesg with the fullmac polling patch is here:
> http://cliffrowley.com/stuff/prism54/prism-fullmac-polling-dmesg.txt
> 
> Wont be long and Ill have softmac tested .. forgot to cat
> /proc/interrupts and I've removed the driver already.  I'll post
> interrupts in a moment :)
> 
> ^^ scrub that, I misunderstood - I thought the 2nd patch was for the
> softmac.
> 
> Here's my interrupts with the fullmac driver loaded:
> 
>             CPU0
>    0:    7087549          XT-PIC  timer
>    1:      25008          XT-PIC  i8042
>    2:          0          XT-PIC  cascade
>    5:       5837          XT-PIC  yenta, Intel 82801DB-ICH4, Intel
> 82801DB-ICH4 Modem
>    8:          3          XT-PIC  rtc
>    9:     217595          XT-PIC  acpi
>   11:     864577          XT-PIC  yenta, radeon at pci:0000:01:00.0,
> ehci_hcd, uhci_hcd, uhci_hcd, uhci_hcd, eth0, eth1
>   12:      62807          XT-PIC  i8042
>   14:     142752          XT-PIC  ide0
>   15:         36          XT-PIC  ide1
> NMI:          0
> LOC:          0
> ERR:      40782
> MIS:          0
> 
> _______________________________________________
> Prism54-devel mailing list
> Prism54-devel at prism54.org
> http://prism54.org/mailman/listinfo/prism54-devel
>