[Prism54-devel] HELP : Broadcast data fails in WPA

[Denis Vlasenko]

On Wednesday 07 July 2004 11:03, navaneeth wrote:
> Hi All,
>
>        I am adding WPA support to AP for my company.
>
> I use the DOT11_OID_STAKEY for setting unicast and broadcast keys to the
> device.
>
> After I set the key, I read from the device and found the values correct.
>
> I use key ID 0 for unicast and Key ID 1 for broadcast.
>
> I use DOT11_OID_STASC for setting and getting the sequence counters.
>
> For broadcast the onlydiffence is that I set the keys with MAC ADDRESS
> FF-FF-FF-FF-FF-FF.
>
> I also set broacast key ID (1) as DEFAULT KEY.
>
> The unicast key seems to be working fine. I can to and from the AP when I
> connect using any wireless Client.
>
> However getting IP for client fails (DHCP).
>
> When I checked the reason, I found that the broadcast key is not being used
> at all.
>
> When I send broadcast data also, the UNICAST Sequence Counter is
> increasing. The broadcast sequence counter is not increasing at all.
>
> Can anyone please point me as to why the device is not using the broadcast
> key when sending broadcast packet.
>
> However it is using the DEFAULT key Index for broadcast which is 1.
>
> Any pointers on this will be greatly appreciated.

Can we see the code?
--
vda