[Prism54-users] WG511: timeout waiting for mgmt response 1000

[Benoit Panizzon]

Hi

After several success messages I heard about his card I decided to buy one 
myself.
I downloaded the newest firmware from the prism54.org website. I'm using a 
homebreed kernel 2.6.8.1 under Debian 'sarge'.
The card is correctly detected when inserted and after an ifconfig eth1 up it 
loads the firmware, then everything seams to go wrong.

No LED flashing, lots of error messages.

I have a Win2K Partition on the same machine and the card works fine there. So 
it's not a hardware issue.
I did also try to find any newer .arm files on the Windows Install CD or on 
the W2K Installation, but there's just nothing there.

While 'googling' I've found many reports of other having exactly the same 
problem, but apparently no-one published a solution.

So anybody an idea how to solve this problem?

-Benoit-

Sep 22 09:08:19 c-3po kernel: Loaded prism54 driver, version 1.2
Sep 22 09:08:19 c-3po kernel: PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
Sep 22 09:08:19 c-3po kernel: ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 11 
(level, low) -> IRQ 11
Sep 22 09:08:19 c-3po pci.agent[1938]:      prism54: loaded successfully

Sep 22 09:09:51 c-3po kernel: eth1: islpci_open()
Sep 22 09:09:51 c-3po kernel: eth1: resetting device...
Sep 22 09:09:51 c-3po kernel: eth1: uploading firmware...
Sep 22 09:09:52 c-3po kernel: eth1: firmware uploaded done, now triggering 
reset...
Sep 22 09:09:53 c-3po kernel: eth1: device soft reset timed out
Sep 22 09:09:54 c-3po kernel: eth1: timeout waiting for mgmt response 1000, 
triggering device
Sep 22 09:09:55 c-3po kernel: eth1: timeout waiting for mgmt response
Sep 22 09:09:55 c-3po kernel: eth1: timeout waiting for mgmt response 1000, 
triggering device
Sep 22 09:09:56 c-3po kernel: eth1: timeout waiting for mgmt response
Sep 22 09:09:56 c-3po kernel: eth1: timeout waiting for mgmt response 1000, 
triggering device
Sep 22 09:09:57 c-3po kernel: eth1: timeout waiting for mgmt response
Sep 22 09:09:57 c-3po kernel: eth1: timeout waiting for mgmt response 1000, 
triggering device
Sep 22 09:09:58 c-3po kernel: eth1: timeout waiting for mgmt response
Sep 22 09:09:58 c-3po kernel: eth1: mgmt tx queue is still full
Sep 22 09:09:58 c-3po last message repeated 14 times
Sep 22 09:09:58 c-3po kernel: eth1: mgt_commit has failed. Restart the device
Sep 22 09:10:08 c-3po kernel: eth1: no IPv6 routers present