[Prism54-users] still can't load firmware

[Luis R. Rodriguez]

Ah I didn't see this thread before I replied. This is bizarre.. 

What's the out of output1.txt and output2.txt in:

rmmod prism54
dmesg -c > /dev/null
modprobe prism54
dmesg -c | tee output1.txt
ifconfig eth0 up
dmesg -c | tee output2.txt

	Luis

On Sat, Jul 03, 2004 at 10:45:56PM +0200, Franco wrote:
> > Sizes for firmware are :
> > 1.0.4.3 - 93996
> > 1.0.3.0 - 92476
> 
> Yes, I do confirm. But I also gave a try to the the firmware supplied
> with the card, which is 91020 bytes long.
> 
> > Have you got /etc/hotplug/firmware.agent in place ?
> 
> Yes, it is
> 
> > Is it executable ?
> 
> yes... 755
> 
> > You got /sys mounted ?
> 
> Yes, it is mounted n fstab with:
> 
> 	none /sys sysfs defaults 0 0
> 
> and ls -l /sys says:
> 
> total 0
> drwxr-xr-x  31 root root 0 Jun 27  2004 block
> drwxr-xr-x   8 root root 0 Jun 26 23:13 bus
> drwxr-xr-x  18 root root 0 Jun 26 23:13 class
> drwxr-xr-x   6 root root 0 Jun 27  2004 devices
> drwxr-xr-x   3 root root 0 Jun 27  2004 firmware
> drwxr-xr-x  30 root root 0 Jun 26 23:13 module
> drwxr-xr-x   2 root root 0 Jun 27  2004 power
> 
> 
> Franco
> 
> 
> _______________________________________________
> Prism54-users mailing list
> Prism54-users at prism54.org
> http://prism54.org/mailman/listinfo/prism54-users

-- 
GnuPG Key fingerprint = 113F B290 C6D2 0251 4D84  A34A 6ADD 4937 E20A 525E