[Prism54-users] Netgear WG311 Installation

[m0bius]

> -----Original Message-----
> From: prism54-users-admin@prism54.org [mailto:prism54-users-
> admin@prism54.org] On Behalf Of Luis R. Rodriguez
> Sent: Thursday, January 22, 2004 7:08 PM
> To: m0bius
> Cc: prism54-users@prism54.org
> Subject: RE: [Prism54-users] Netgear WG311 Installation
> 
> 
> > 00:0d.0 Class 0200: 168c:0013 (rev 01)
> >         Subsystem: 1385:4900
> 
> This guy is not in our suported cards and if you read it was Atheros then
> it probably was. If you want to try if your card would work with our
> driver you can apply the patch:
> 
> wget http://prism54.org/~mcgrof/patch-netgearWG311.diff
> cd prism54-cvs-latest
> patch -p1 < ../patch-netgearWG311.diff
> 
> If you can't get the patch to work read the patch with an editor, it
> should give you an idea what to do.
> 
> 	Luis

Ok this is even weirder...

I've applied the patch and the results:

kernel: Loaded prism54 driver, version 1.0.2.2
kernel: PCI: Found IRQ 2 for device 0000:00:0d.0
kernel: IRQ routing conflict for 0000:00:0d.0, have irq 9, want irq 2

And while doing the modprobe:

modprobe prism54
Segmentation Fault. <- ???

Is this a simple conflict solved by the bios or is the driver requests
specific IRQ address?

Paris