[Prism54-users] Can't get 3Com OfficeConnect card working.

[Marijn Deé]

On Sunday 09 November 2003 18:51, Luis R. Rodriguez wrote:
> I have the same 3com 3CRSHPW15496, which is a different model, what does
> your lspci -n say? Also, do you have /sbin/hotplug?

Yes, /sbin/hotplug exists and runs /etc/hotplug.d/default/default.hotplug 
and /etc/hotplug/pci.agent and /etc/hotplug/usb.agent when I boot (I can see 
that in /var/log/messages.

root # cat /proc/sys/kernel/hotplug
/sbin/hotplug

But when I do
root # modprobe prism54

I see no activity from hotplug scripts, except sometimes an Oops in 
default.hotplug, net.hotplug or bash.

root # lspci -n
pcilib: Cannot open /proc/bus/pci/02/00.0
Unable to read 64 bytes of configuration space.00:00.0 Class 0600: 1039:0650 
(rev 80)
00:01.0 Class 0604: 1039:0001
00:02.0 Class 0601: 1039:0008 (rev 14)
00:02.3 Class 0c00: 1039:7007
00:02.5 Class 0101: 1039:5513
00:02.6 Class 0703: 1039:7013 (rev a0)
00:02.7 Class 0401: 1039:7012 (rev a0)
00:03.0 Class 0c03: 1039:7001 (rev 0f)
00:03.1 Class 0c03: 1039:7001 (rev 0f)
00:03.2 Class 0c03: 1039:7001 (rev 0f)
00:03.3 Class 0c03: 1039:7002
00:04.0 Class 0200: 1039:0900 (rev 90)
00:0a.0 Class 0607: 104c:ac50 (rev 02)
01:00.0 Class 0300: 1039:6325

Marijn

>
> 	Luis
>
> On Sun, 9 Nov 2003, Marijn Deé wrote:
> > Hi,
> >
> > I'm trying to get my OfficeConnect Wireless 11g PC Card (3CRWE154G72) to
> > work with the prism54 driver on an ASUS 2530D Notebook.
> >
> > My kernel verion:
> > Linux mees 2.4.23-pre9 #2 Fri Nov 7 19:37:00 CET 2003 i686 Intel(R)
> > Pentium(R) 4 CPU 2.66GHz GenuineIntel GNU/Linux
> >
> > I compiled the drivers from today's snapshots.
> >
> > I have the pcimcia-cs stuff compiled and cardmgr is running.
> > I also copied the firmware.agent to /etc/hotplug and downloaded the
> > firmware file:
> >
> > marijn@mees marijn $ ls -la /usr/lib/hotplug/firmware/isl3890
> > -rwxr--r--    1 root     root        93996 Nov  5 23:29 /usr/lib/hotplu=
g/
> > firmware/isl3890
> >
> > When I enter "modprobe prism54" I get:
> > /lib/modules/2.4.23-pre9/kernel/drivers/net/wireless/prism54/prism54.o:
> > init_module: No such device
> > Hint: insmod errors can be caused by incorrect module parameters,
> > including invalid IO or IRQ parameters.
> >       You may find more information in syslog or the output from dmesg
> > /lib/modules/2.4.23-pre9/kernel/drivers/net/wireless/prism54/prism54.o:
> > insmod
> > /lib/modules/2.4.23-pre9/kernel/drivers/net/wireless/prism54/prism54.o
> > failed
> > /lib/modules/2.4.23-pre9/kernel/drivers/net/wireless/prism54/prism54.o:
> > insmod prism54 failed
> >
> > dmesg:
> > Loaded prism54 driver, version 1.0.2.2
> > latency timer: 0
> > DMA Memory support mask is 0xffffffff
> > prism54: pci_set_master(pdev)
> > PCI Memory remapped to 0x00000000
> > islpci_alloc_memory
> > islpci_statistics
> > eth1: resetting device...
> > eth1: uploading firmware...
> > isl38xx_upload_firmware(0xde8df000, 0x1be40000)
> > prism54: request_firmware() failed for 'isl3890'
> > eth1: could not upload firmware ('isl3890')
> > islpci_statistics
> > prism54: No devices found, driver not installed.
> >
> > It seems that firmware.agent crashes. I always get an Oops sooner or
> > later after I tried to modprobe prism54. Sometimes in firmware.agent, b=
ut
> > usually in an other process much later.
> >
> > --
> >
> > Marijn
> > _______________________________________________
> > Prism54-users mailing list
> > Prism54-users@prism54.org
> > http://prism54.org/mailman/listinfo/prism54-users