[Prism54-users] Can't get 3Com OfficeConnect card working.

[Luis R. Rodriguez]

I have the same 3com 3CRSHPW15496, which is a different model, what does
your lspci -n say? Also, do you have /sbin/hotplug?

=09Luis

On Sun, 9 Nov 2003, Marijn De=E9 wrote:

> Hi,
>
> I'm trying to get my OfficeConnect Wireless 11g PC Card (3CRWE154G72) to =
work
> with the prism54 driver on an ASUS 2530D Notebook.
>
> My kernel verion:
> Linux mees 2.4.23-pre9 #2 Fri Nov 7 19:37:00 CET 2003 i686 Intel(R) Penti=
um(R)
> 4 CPU 2.66GHz GenuineIntel GNU/Linux
>
> I compiled the drivers from today's snapshots.
>
> I have the pcimcia-cs stuff compiled and cardmgr is running.
> I also copied the firmware.agent to /etc/hotplug and downloaded the firmw=
are
> file:
>
> marijn@mees marijn $ ls -la /usr/lib/hotplug/firmware/isl3890
> -rwxr--r--    1 root     root        93996 Nov  5 23:29 /usr/lib/hotplug/
> firmware/isl3890
>
> When I enter "modprobe prism54" I get:
> /lib/modules/2.4.23-pre9/kernel/drivers/net/wireless/prism54/prism54.o:
> init_module: No such device
> Hint: insmod errors can be caused by incorrect module parameters, includi=
ng
> invalid IO or IRQ parameters.
>       You may find more information in syslog or the output from dmesg
> /lib/modules/2.4.23-pre9/kernel/drivers/net/wireless/prism54/prism54.o:
> insmod /lib/modules/2.4.23-pre9/kernel/drivers/net/wireless/prism54/prism=
54.o
> failed
> /lib/modules/2.4.23-pre9/kernel/drivers/net/wireless/prism54/prism54.o: i=
nsmod
> prism54 failed
>
> dmesg:
> Loaded prism54 driver, version 1.0.2.2
> latency timer: 0
> DMA Memory support mask is 0xffffffff
> prism54: pci_set_master(pdev)
> PCI Memory remapped to 0x00000000
> islpci_alloc_memory
> islpci_statistics
> eth1: resetting device...
> eth1: uploading firmware...
> isl38xx_upload_firmware(0xde8df000, 0x1be40000)
> prism54: request_firmware() failed for 'isl3890'
> eth1: could not upload firmware ('isl3890')
> islpci_statistics
> prism54: No devices found, driver not installed.
>
> It seems that firmware.agent crashes. I always get an Oops sooner or late=
r
> after I tried to modprobe prism54. Sometimes in firmware.agent, but usual=
ly
> in an other process much later.
>
> --
>
> Marijn
> _______________________________________________
> Prism54-users mailing list
> Prism54-users@prism54.org
> http://prism54.org/mailman/listinfo/prism54-users
>