[Prism54-users] wg511 not working here

[pinguino666@libero.it]

i did all things mentioned on readme, all is ok but still not working, ma=
ybe can
be this thing?

Linux Kernel Card Services
  options:  [pci] =
[cardbus] [pm]
PCI: IRQ 0 for device 0000:00:0a.0 doesn't match PIRQ mas=
k - try pci=3Dusepirqmask
      <---- I DON'T LIKE THIS LINE
PCI: Assig=
ned IRQ 9 for device 0000:00:0a.0
Yenta: CardBus bridge found at 0000:00=
:0a.0 [0e11:b103]
Yenta: Enabling burst memory read transactions
Yenta:=
 Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus inte=
rrupts to PCI
Yenta: ISA IRQ list 0008, PCI irq9
Socket status: 3000000=
6
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08=
ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x378-=
0x37f 0x388-0x38f
0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.=0D
=
PCI: Found IRQ 9 for device 0000:00:0a.0
Yenta: CardBus bridge found at =
0000:00:0a.0 [0e11:b103]
Yenta: Using CSCINT to route CSC interrupts to =
PCI
Yenta: Routing CardBus interrupts to PCI
Yenta: ISA IRQ list 0008, =
PCI irq9
Socket status: 30000020
Loaded prism54 driver, version 1.0.2.2=

PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
eth0: uploading firmw=
are...
prism54: request_firmware() failed for 'isl3890'
eth0: could not=
 upload firmware ('isl3890')
eth0: All went well, except firmware load=0D
=
prism54: probe of 0000:02:00.0 failed with error -5

some1 could help m=
e ? im becoming mad with this card :D
i'm using slackware9.1 and i have =
a wg511 card.

(the rest is all ok, firmware.agent is called by hotplug=
, firmware is in its
directory etc..f)