[Prism54-devel] Prism54 development update

[Sebastien]

> Uncompressed firmware should be ok, as long as the hw setup done during the
> self-extract is done too, or am I missing something?

The uncompressed firmware is supposed to be run from a TCM area of the ARM, 
which is not accessible through the memory window, so the driver can't write 
directly to it. We need a bootstrap code which will setup the hardware, 
enable the TCM, write the uncompressed firmware into it and boot it (it 
doesn't start at address zero, by the way), just like the official unpacker 
does.