[Prism54-devel] SMC 2802W v2

[Esa Loukkola]

Hello,

I received a few of these new SMC PCI cards that Karsten Richter has
mentioned on the list already. With the firmware file I obtained from him
and the latest cvs snapshot from today, I was able to get this far (I set
VERBOSE high):

<from dmesg>
Loaded prism54 driver, version 1.0.2.2
latency timer: 50
prism54: pci_set_master(pdev)
PCI Memory remapped to 0x00000000
islpci_alloc_memory
islpci_mgmt_rx_fill
islpci_statistics
eth2: prism54 driver detected card model: SMC2802W V2
eth2: islpci_open()
eth2: resetting device...
eth2: uploading firmware...
isl38xx_upload_firmware(0xd8cc3000, 0x8700000)
eth2: firmware uploaded done, now triggering reset...
isl38xx_interface_reset
IRQ: Identification register 0xd8cc3000 0x4
IRQ: Init flag, device initialized
islpci_mgt_transmit
PIMFOR: op 0, oid 0x00000000, device 0, flags 0x0 length 0x6
[01][00][00][00][00][00][00][00][00][00][00][06]
[00][00][00][00][00][00]
isl38xx trigger device
Device is in active state
eth2: timeout waiting for mgmt response 100, trigging device
isl38xx trigger device
Device is in active state
eth2: timeout waiting for mgmt response
islpci_statistics
islpci_statistics

# iwconfig eth2
eth2      no wireless extensions.

..And that's it, doesn't work beyond ifconfig eth2 up, which gives the
timeout. So it appears that the changes Jens Maurer made to the management
code have affected this card as well as the issues listed in bug #2.
Everything else is pretty much consistent with what Karsten reported.

Any suggestions for as to what debug information I could provide or code
changes I could toy around with?

Greetings, Esa

-- 
Esa Loukkola
esa.nospam@nic.spamfilter.fi.invalid