[Prism54-devel] New revision of SMC 2802W card, Firmware 2.4.3.0
Jens Maurer
Jens.Maurer@gmx.net
Sun, 25 Jan 2004 22:04:37 +0100
Karsten Richter wrote:
> So the IRQ is correctly assigned to the card.
Ok.
> Anyway, no interrupt is generated according to /proc/interrupts,
> but do the cards generate interrupts _before_ the
> "firmware accepted" interrupt?
The first interrupt is the "reset" interrupt.
> If they don't this behaviour would be normal, if the firmware was the
> wrong one for this card (which is quite probable).
Hm. Ok. I'm out of ideas here.
Jens Maurer