[Prism54-devel] [Bug 80] kernel BUG at drivers/net/wireless/prism54/oid_mgt.c:333!

[bugzilla-daemon@mcgrof.com]

http://prism54.org/cgi-bin/bugzilla/show_bug.cgi?id=80





------- Additional Comments From robert.vojta@mandrake.cz  2004-04-25 16:21 -------
Here you can find log info with latest CVS ...

Loaded prism54 driver, version 1.1
PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
eth2: prism54 driver detected card model: SMC2835W V2
eth2: islpci_open()
eth2: resetting device...
eth2: uploading firmware...
eth2: firmware uploaded done, now triggering reset...
eth2: expecting oid 0xff020003, received 0x2009806.
eth2: timeout waiting for mgmt response
eth2: expecting oid 0x10000002, received 0x19000001.
eth2: timeout waiting for mgmt response 3, triggering device
eth2: timeout waiting for mgmt response
eth2: Out of memory, cannot handle oid 0x7340dea1
eth2: timeout waiting for mgmt response 1000, triggering device
eth2: timeout waiting for mgmt response 626, triggering device
eth2: timeout waiting for mgmt response
eth2: expecting oid 0x12000007, received 0x0.
eth2: timeout waiting for mgmt response 231, triggering device
eth2: timeout waiting for mgmt response
eth2: errant PIMFOR application frame
eth2: timeout waiting for mgmt response 1000, triggering device
eth2: timeout waiting for mgmt response
eth2: mgt_commit has failed. Restart the device
eth2: no IPv6 routers present
eth2: islpci_close ()
eth0: Setting full-duplex based on MII #1 link partner capability of 45e1.
Disabled Privacy Extensions on device c037ad40(lo)
eth0: Setting full-duplex based on MII #1 link partner capability of 45e1.
eth2: islpci_open()
eth2: resetting device...
eth2: uploading firmware...
eth0: no IPv6 routers present
prism54: request_firmware() failed for 'isl3890'
eth2: could not upload firmware ('isl3890')
eth2: islpci_open()
eth2: resetting device...
eth2: uploading firmware...
prism54: request_firmware() failed for 'isl3890'
eth2: could not upload firmware ('isl3890')
eth2: islpci_open()
eth2: resetting device...
eth2: uploading firmware...
eth2: firmware uploaded done, now triggering reset...
eth2: device soft reset timed out
eth2: errant PIMFOR application frame
eth2: timeout waiting for mgmt response 1000, triggering device
eth2: timeout waiting for mgmt response
eth2: expecting oid 0x10000002, received 0x80000.
eth2: timeout waiting for mgmt response
eth2: expecting oid 0x12000002, received 0x95d00010.
eth2: timeout waiting for mgmt response
eth2: expecting oid 0x12000007, received 0x12000002.
eth2: timeout waiting for mgmt response
eth2: expecting oid 0xff02000f, received 0x95d00010.
eth2: timeout waiting for mgmt response
eth2: mgt_commit has failed. Restart the device
eth2: expecting oid 0x17000007, received 0xff02000f.
eth2: timeout waiting for mgmt response
eth2: expecting oid 0x12000003, received 0x0.
eth2: timeout waiting for mgmt response 84, triggering device
eth2: timeout waiting for mgmt response
eth2: expecting oid 0x17000010, received 0x0.
eth2: timeout waiting for mgmt response
eth2: expecting oid 0x10000001, received 0x2dd10010.
eth2: timeout waiting for mgmt response
eth2: Out of memory, cannot handle oid 0x00006d18
eth2: timeout waiting for mgmt response 1000, triggering device
eth2: timeout waiting for mgmt response
eth2: expecting oid 0xff020008, received 0x12000002.
eth2: timeout waiting for mgmt response 193, triggering device
eth2: timeout waiting for mgmt response
eth2: expecting oid 0x12000006, received 0x12000002.
eth2: no IPv6 routers present
eth2: timeout waiting for mgmt response
eth2: expecting oid 0xff02000c, received 0x12000007.
eth2: timeout waiting for mgmt response
eth2: mgt_commit has failed. Restart the device

Some lspci info ...

00:07.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller
(rev 02)
        Subsystem: Acer Incorporated [ALI]: Unknown device 0033
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 168, cache line size 20
        Interrupt: pin A routed to IRQ 5
        Region 0: Memory at 20000000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
        Memory window 0: 20400000-207ff000 (prefetchable)
        Memory window 1: 20800000-20bff000
        I/O window 0: 00004000-000040ff
        I/O window 1: 00004400-000044ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
        16-bit legacy interface ports at 0001

02:00.0 Network controller: Harris Semiconductor D-Links DWL-g650 A1 (rev 01)
        Subsystem: Standard Microsystems Corp [SMC]: Unknown device a835
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 80 (2500ns min, 7000ns max)
        Interrupt: pin A routed to IRQ 5
        Region 0: Memory at 20800000 (32-bit, non-prefetchable) [size=8K]
        Capabilities: [dc] Power Management version 1
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-




------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.