[Prism54-users] ifconfig issue
sudha.ramachandra at wipro.com
sudha.ramachandra at wipro.com
Mon Feb 28 13:01:20 UTC 2005
Hi All,
i am herewith sending the details of the results that i get when i give insmod "prism54.o" , "ifconfig eth0" and "ifconfig eth0 up".....insmod works properly and i have also checked using lsmod to verify if the module has been inserted prorperly but the problem occurs when i give ifconfig eth0 up...the kernel version used is 2.4.24....Any help is appreciated....
regards
sudha
# insmod prism54.o
Using /lib/modules/net/prism54.o
Loaded prism54 driver, version 1.2
# ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:30:B4:00:00:00
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
Interrupt:28 Base address:0xe000
#ifconfig eth0 up
eth0: prism54 driver detected card model: PRISM Duette/GT
eth0: islpci_open()
eth0: resetting device.....
eth0: uploading firmware....
Unable to handle kernel paging request at virtual address 4bfff000t0800000,8M me
alloc_bootmem_low
pgd = c0e54000ver model core
[4bfff000] *pgd=00000000, *pmd = 00000000ng delay loop... 532.48 BogoMIPSes.
Internal error: Oops: 8f5ailable for scripting, as
CPU: 0s the
pc : [<c2871aac>] lr : [<90000013>] Not taintedode, 413K data, 52K init)
#
# The kernel HO
r3 : 360000ea r2 : ff00c020 r1 : 00000006 r0 : 00000000
Flags: nzCv IRQs on FIQs on Mode SVC_32 Segment user
Control: 39FF Table: 00E54000 DAC: 00000015
Process ifconfig (pid: 32, stack limit = 0xc0dbc368)
Stack: (0xc0dbde78 to 0xc0dbe000)
de60: 4bffe030 4bfff000
de80: 4bffe078 00000001 00008914 c0dbde98 00000000 c1fffea0 0080405b c1e80960
dea0: c1e80960 00000001 00000000 00000001 00000000 00000000 00008914 c2872274
dec0: 00000000 c1e80960 0000dc05 c287251c c1e80800 c1e8082c c1e80960 00000000
dee0: c0dbdf48 c287209c c1e80800 c1e8082c 00000000 c00b76e0 c1e80800 00001043
df00: 00001002 c00b8d04 00000000 00000000 c1e80800 bffffd24 c00ec06c 00000014
df20: 00000000 00000000 1043d792 00000000 4012711c bfffff3a 65746830 0000a580
df40: bfffff3f 00000000 1043d792 00000000 4012711c bfffff3a 00008914 bffffd24
df60: c0e675c0 00000004 ffffffe7 c0dbc000 4012711c 00000000 c00b1554 c0050de8
df80: 400d5180 c000b3bc bffffd64 bffffd24 00000041 00000036 c00175c4 4012711c
dfa0: 00000000 c0017400 bffffd64 c001737c 00000004 00008914 bffffd24 00001043
dfc0: bffffd64 bffffd24 00000041 00015e58 00000003 bffffe6c 4012711c 00000000
dfe0: 00015ff4 bffffd24 000094e8 400d5184 60000010 00000004 60040400 81400000
Backtrace: frame pointer underflow
Function entered at [<c1fffff4>] from [<00002000>]
Backtrace aborted due to bad frame pointer <00002000>
Code: da000004 e4963004 e2444004 e3540000 (e4853004)
Confidentiality Notice
The information contained in this electronic message and any attachments to this message are intended
for the exclusive use of the addressee(s) and may contain confidential or privileged information. If
you are not the intended recipient, please notify the sender at Wipro or Mailadmin at wipro.com immediately
and destroy all copies of this message and any attachments.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://prism54.org/pipermail/prism54-users/attachments/20050228/acd22e7f/attachment.htm
More information about the Prism54-users
mailing list