[Prism54-users] Another 'device soft reset timed out' error (WN4110B)

[David Martinez]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1


I have a box with an Accon WN4110B (Prism54) and i get the infamous
'device soft reset timed out'

This is a limited copy of my dmesg log. I'm using the 1.0.4.3 firmware
version (from prism54.org)

eth0: prism54 driver detected card model: PRISM Duette/GT
eth0: islpci_open()
eth0: resetting device...
eth0: uploading firmware...
eth0: firmware uploaded done, now triggering reset...
eth0: device soft reset timed out
eth0: timeout waiting for mgmt response 1000, trigging device
eth0: timeout waiting for mgmt response 613, trigging device
eth0: timeout waiting for mgmt response 394, trigging device
eth0: timeout waiting for mgmt response 185, trigging device
eth0: timeout waiting for mgmt response
eth0: timeout waiting for mgmt response 1000, trigging device
eth0: timeout waiting for mgmt response 769, trigging device
eth0: timeout waiting for mgmt response 550, trigging device
eth0: timeout waiting for mgmt response 334, trigging device
eth0: timeout waiting for mgmt response 119, trigging device
eth0: timeout waiting for mgmt response
eth0: timeout waiting for mgmt response 1000, trigging device
eth0: timeout waiting for mgmt response 693, trigging device
eth0: timeout waiting for mgmt response 477, trigging device
eth0: timeout waiting for mgmt response 261, trigging device
eth0: timeout waiting for mgmt response 53, trigging device
eth0: timeout waiting for mgmt response
eth0: timeout waiting for mgmt response 1000, trigging device
eth0: timeout waiting for mgmt response 677, trigging device
eth0: timeout waiting for mgmt response 461, trigging device
eth0: timeout waiting for mgmt response 247, trigging device
eth0: timeout waiting for mgmt response 40, trigging device
eth0: timeout waiting for mgmt response
eth0: mgmt tx queue is still full
eth0: mgmt tx queue is still full
eth0: mgmt tx queue is still full
eth0: mgmt tx queue is still full
eth0: mgmt tx queue is still full
eth0: mgmt tx queue is still full
eth0: mgmt tx queue is still full
eth0: mgmt tx queue is still full
eth0: mgmt tx queue is still full
eth0: mgmt tx queue is still full
eth0: mgmt tx queue is still full
eth0: mgmt tx queue is still full
eth0: mgmt tx queue is still full
eth0: mgmt tx queue is still full
eth0: mgmt tx queue is still full
eth0: mgt_commit has failed. Restart the device
eth0: mgmt tx queue is still full


And also some useful info.
$lspci
0000:02:09.0 Network controller: Intersil Corporation Intersil ISL3890
[Prism GT/Prism Duette] (rev 01)

$lspci -vvvn
0000:02:09.0 Class 0280: 1260:3890 (rev 01)
Subsystem: 1113:4203
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping-SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
~        Latency: 80 (2500ns min, 7000ns max), cache line size 04
~        Interrupt: pin A routed to IRQ 217
~        Region 0: Memory at feafe000 (32-bit, non-prefetchable)
~        Capabilities: [dc] Power Management version 1
~                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
~                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

It seems that is something related with the firmware, but it is so
extrange because the card seems standard. Do you know something about
the (rev 01) flag?

Any idea?


- --
David MARTINEZ NIETO
Resident CESAL. Casier 3/4/7.
Ecole SUPELEC. Plateau du Moulon.
3 rue Joliot-Curie.
91192 Gif-sur-Yvette CEDEX
Tel: +33(0)169350883
Por: +33(0)622382017

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFAm2moROcC29yTpkMRAkPOAJ4sC+sWjDv+mUJL96629KboSvVtUACgnyHq
xOIrS6p0w494V6lLxX9qDmw=
=RRvX
-----END PGP SIGNATURE-----