[Prism54-users] PCI IDs

[Luis R. Rodriguez]

It may be the newer model, which doesn't work with our driver :(.

	Luis

On Mon, Aug 16, 2004 at 09:22:59PM +1000, nornagon wrote:
> Ugh.
> 
> Ok, I edited islpci_hotplug.c and added the definition for my card,
> then recompiled the kernel. Then I put the latest firmware in
> /usr/lib/hotplug/firmware. Now ifconfig eth0 up should, in theory,
> work. But apparently eth0 doesn't exist :'(
> 
> On Sun, 15 Aug 2004 04:18:49 -0400, Luis R. Rodriguez
> <mcgrof at ruslug.rutgers.edu> wrote:
> > 
> > 
> > On Sun, Aug 15, 2004 at 10:29:48AM +1000, nornagon wrote:
> > > I recently bought an SMC2802W, and I am attempting to make it work on
> > > a new system, installed from the debian CDs (stable). The odd thing
> > > is, though, lspci -vn tells me that the card's PCI ID is 1260:f890 and
> > > its subsystem ID is 1113:ee03. The PCI Id ought to be 1260:3890 and
> > > the subsystem ID ought to be 113:ee03. Is this due to a software or
> > > hardware problem? Is there a way I can fix it? If not, is there a
> > > workaround?
> > >
> > > Thanks muchly for your help.
> > 
> > Could be a hardware problem as this is the first SMC2802W card I hear
> > with that PCI ID. You can make prism54 work with it by changing the PCI
> > ID table. The attached patch does this. You apply it by going
> > to the prism54 dir (kernel or cvs code, the same dir islpci_hotplug.c is)
> > and doing:
> > 
> > patch -p0 < /path/to/bogus.diff
> > 
> >         Luis
> > 
> > --
> > GnuPG Key fingerprint = 113F B290 C6D2 0251 4D84  A34A 6ADD 4937 E20A 525E
> > 
> > 
> > 
> 
> 
> -- 
> - nornagon
> http://www.nornrock.com
> _______________________________________________
> Prism54-users mailing list
> Prism54-users at prism54.org
> http://prism54.org/mailman/listinfo/prism54-users

-- 
GnuPG Key fingerprint = 113F B290 C6D2 0251 4D84  A34A 6ADD 4937 E20A 525E