[Prism54-users] Re: Trouble installing drivers with 2.6.-test9

[David Topper]

Nope, it's checked off under:

Device Drivers
    - Networking Support
       - Network Device Support
          - Wireless LAN (non Hamradio)

Is there something else I need checked off?

DT

-- 
Technical Director - Virginia Center for Computer Music
http://www.virginia.edu/music/vccm.html



Brian Bothwell wrote:

>Looks like maybe you forgot to compile wireless support into the kernel?
>
>
>>and dmesg confirms:
>>
>>prism54: Unknown symbol iw_handler_set_spy
>>prism54: Unknown symbol iw_handler_get_thrspy
>>prism54: Unknown symbol wireless_send_event
>>prism54: Unknown symbol iw_handler_get_spy
>>prism54: Unknown symbol iw_handler_set_thrspy
>>
>>so I suspect I've just got something mucked in my patched kernel.
>>
>>Thanks,
>>
>>DT
>>
>>-- 
>>Technical Director - Virginia Center for Computer Music
>>http://www.virginia.edu/music/vccm.html
>>
>>
>>
>>David Topper wrote:
>>
>>
>>>Hi folks, I've got one of the Prism/Intersil 802.11g cards.  Not 
>>>exactly sure which one.  But in any case, I'm having some trouble.  
>>>Here's what I've done: - compiled and installed kernel 2.6-test9 - 
>>>dl'd the prism54 drivers (last friday) - applied the patches - 
>>>compiled the driver ... and basically have done everything else in the 
>>>README but when I went to compile my kernel, I got the following 
>>>message: make[4]: *** No rule to make target 
>>>drivers/net/wireless/prism54/Makefile'. Stop. make[3]: *** 
>>>[drivers/net/wireless/prism54] Error 2 make[2]: *** 
>>>[drivers/net/wireless] Error 2 make[1]: *** [drivers/net] Error 2 
>>>make: *** [drivers] Error 2 so I coped the ksrc dir from the prism54 
>>>driver into that directory.  Now I get the following error: 
>>>drivers/net/wireless/Makefile:22: 
>>>/usr/src/linux-2.6.0-test9/Makefile.k26: No such file or directory 
>>>make[3]: *** No rule to make target 
>>>/usr/src/linux-2.6.0-test9/Makefile.k26'. Stop. make[2]: *** 
>>>[drivers/net/wireless] Error 2 make[1]: *** [drivers/net] Error 2 
>>>make: *** [_clean_drivers] Error 2 and at this point I'm not sure how 
>>>to get things going. Thanks, DT 
>>
>>
>>
>>_______________________________________________
>>Prism54-users mailing list
>>Prism54-users@prism54.org
>>http://prism54.org/mailman/listinfo/prism54-users
>>