[Prism54-users] WG511 prism54 driver installation on Fedora

dhobner@ideorlando.org dhobner@ideorlando.org
Tue, 16 Dec 2003 10:59:36 -0500 (EST)


I have learned some things since my last email that I want to share
I am able to see my access point "ESSID: NTCOIS1" by doing an "iwlist eth1
scanning".  I do see some output that I am not sure about (error or
info?).  I have included output below.  I am using a Netgear WG511 card
with Fedora Core 1.

1) Should fireware_class modules be used by (equals 0) something?
2) Should I see the "missing kernel or user mode driver Prism54" message
in /var/log/messages?
3) Should I see "_mgt_get_request(): data length (184!=1452) mismatch for
oid=0x1c000043" message in dmesg?
4) The power and data lights are flicking on the card.  The power light
should stay steady on.
5) I know this driver is in development so I am not sure what to expect.

---------------------------------------------
lsmod

prism54                59792   1
firmware_class          6060   0  [prism54]
---------------------------------------------
tail -f /var/log/messages

Dec 16 10:31:34 ntclap1 kernel: cs: cb_alloc(bus 7): vendor 0x1260, device
0x3890
Dec 16 10:31:34 ntclap1 kernel: PCI: Enabling device 07:00.0 (0000 -> 0002)
Dec 16 10:31:34 ntclap1 cardmgr[3707]: socket 1: CardBus hotplug device
Dec 16 10:31:34 ntclap1 pci.agent[17409]: missing kernel or user mode
driver prism54
Dec 16 10:31:35 ntclap1 kernel: ip_tables: (C) 2000-2002 Netfilter core team
Dec 16 10:31:36 ntclap1 dhclient: DHCPDISCOVER on eth1 to 255.255.255.255
port 67 interval 6
Dec 16 10:31:36 ntclap1 devlabel: devlabel service started/restarted
Dec 16 10:31:42 ntclap1 dhclient: DHCPDISCOVER on eth1 to 255.255.255.255
port 67 interval 15
Dec 16 10:31:57 ntclap1 dhclient: DHCPDISCOVER on eth1 to 255.255.255.255
port 67 interval 18
---------------------------------------------
dmesg

cs: cb_alloc(bus 7): vendor 0x1260, device 0x3890
PCI: Enabling device 07:00.0 (0000 -> 0002)
divert: allocating divert_blk for eth1
eth1: prism54_mib_init()
ip_tables: (C) 2000-2002 Netfilter core team
eth1: islpci_open()
eth1: resetting device...
eth1: uploading firmware...
firmware_class.c:call_helper: firmware: /sbin/hotplug firmware add
eth1: firmware uploaded done, now triggering reset...
eth1: prism54_mib_init()
eth1: done with prism54_mib_init()!
_mgt_get_request(): data length (184!=1452) mismatch for oid=0x1c000043
_mgt_get_request(): data length (184!=1452) mismatch for oid=0x1c000043
_mgt_get_request(): data length (184!=1452) mismatch for oid=0x1c000043
_mgt_get_request(): data length (184!=1452) mismatch for oid=0x1c000043
---------------------------------------------
iwlist eth1 scanning

Warning: Driver for device eth1 recommend version 16 of Wireless Extension,
but has been compiled with version 15, therefore some driver features
may not be available...

eth1      Scan completed :
          Cell 01 - Address: 00:09:5B:51:46:B2
                    ESSID:"NTCOIS1"
                    Mode:Master
                    Encryption key:off
                    Frequency:2.412GHz
                    Quality:47/0  Signal level:-71 dBm  Noise level:-118 dBm
          Cell 02 - Address: 00:40:96:39:AD:89
                    ESSID:"tsunami"
                    Mode:Master
                    Encryption key:off
                    Frequency:2.412GHz
                    Quality:44/0  Signal level:-74 dBm  Noise level:-118 dBm
          Cell 03 - Address: 00:02:2D:81:4A:C1
                    ESSID:""
                    Mode:Master
                    Encryption key:on
                    Frequency:2.412GHz
                    Quality:33/0  Signal level:-85 dBm  Noise level:-118 dBm
---------------------------------------------
cat /etc/sysconfig/network-scripts/ifcfg-eth1

# Please read /usr/share/doc/initscripts-*/sysconfig.txt
# for the documentation of these parameters.
ONBOOT=yes
USERCTL=no
PEERDNS=no
TYPE=Wireless
DHCP_HOSTNAME=ntclap1
DEVICE=eth1
BOOTPROTO=dhcp
ESSID=NTCOIS1
MODE=Managed
RATE=
DOMAIN=
NETMASK=
HWADDR=00:09:5b:45:88:f1
IPADDR=
GATEWAY=
CHANNEL=
---------------------------------------------
[root@ntclap1 Desktop]# iwconfig eth1
Warning: Driver for device eth1 recommend version 16 of Wireless Extension,
but has been compiled with version 15, therefore some driver features
may not be available...

eth1      Netgear WG511  Mode:Managed  Channel:6
          Access Point: 00:00:00:00:00:00  Bit Rate:0kb/s  
Sensitivity=20/200
          Retry min limit:8   RTS thr:2347 B   Fragment thr:2346 B
          Encryption key:off
          Link Quality:0  Signal level:0  Noise level:97
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0
---------------------------------------------
ifconfig eth1

eth1      Link encap:Ethernet  HWaddr 00:09:5B:45:88:F1
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:1710 (1.6 Kb)
          Interrupt:11