[Prism54-devel] 3CRWE154G72

[Jean-Baptiste Note]

Hello Cliff,

>From the logs you got with following linmax's advice, your card will be
supported by the softmac driver. But it *seems* also that it should work
with the fullmac driver.

Can you try the following patch against latest SVN (of the _fullmac_
driver of www.prism54.org) :

http://jbnote.free.fr/prism54/try-polling.patch

This patch is huge, if you use another driver version you may want to
try the smaller patch below, which should apply to other versions, maybe
with some offset.

This will tell us if your card is actually unsupported or if this is a
case of irq problems.

Can you also post the result of 'cat /proc/interrupts' after loading the
prism54 driver as you normally use it ?

-- 
Jean-Baptiste Note
+33 (0)6 83 03 42 38
jean-baptiste.note at wanadoo.fr

-------------- next part --------------
A non-text attachment was scrubbed...
Name: poll-reset.patch
Type: text/x-patch
Size: 623 bytes
Desc: not available
Url : http://prism54.org/pipermail/prism54-devel/attachments/20050607/8cb373fb/poll-reset.bin