[Prism54-devel] WG511: Taiwan VS China issue?

[Benoit Panizzon]

> about the subsystem IDs, can you give your lspci -v -n output? And can
> someone with a working WG511 give their lspci -v -n output too? Thanks.

This is the one stating 'made in china'

0000:02:00.0 0280: 1260:3890 (rev 01)
        Subsystem: 1385:4800
        Flags: bus master, medium devsel, latency 80, IRQ 11
        Memory at 10800000 (32-bit, non-prefetchable) [size=8K]
        Capabilities: [dc] Power Management version 1

This is what happend during initialization with the latest CVS Sources.

Sep 24 15:33:53 c-3po kernel: Loaded prism54 driver, version 1.2
Sep 24 15:33:53 c-3po kernel: PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
Sep 24 15:33:53 c-3po kernel: ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 11 
(level, low) -> IRQ 11

-> Bringing interface up...

Sep 24 15:36:14 c-3po kernel: eth1: resetting device...
Sep 24 15:36:14 c-3po kernel: eth1: uploading firmware...
Sep 24 15:36:15 c-3po kernel: eth1: firmware upload complete
Sep 24 15:36:16 c-3po kernel: eth1: reset problem: no 'reset complete' IRQ 
seen
Sep 24 15:36:16 c-3po kernel: eth1: timeout waiting for mgmt response 1000, 
triggering device
Sep 24 15:36:17 c-3po kernel: eth1: timeout waiting for mgmt response
Sep 24 15:36:17 c-3po kernel: eth1: mgt_commit_list: failure. oid=ff020008 
err=-110

etc...

-Benoit-