[Prism54-devel] Netgear WG511 & VIA EPIA MII 10000 not working

[Luis R. Rodriguez]

On Sun, Oct 03, 2004 at 04:50:14PM +0200, Martial Paupe wrote:
> Luis R. Rodriguez (mcgrof at ruslug.rutgers.edu) ?crivait:
> >
> > On Wed, Sep 29, 2004 at 10:13:28PM +0200, Martial Paupe wrote:
> > > Hello,
> > >
> > > I try to install a Netgear WG511 wifi card on a motherboard VIA EPIA MII
> > > 10000.
> > > The OS are a debian 'sarge' version with the kernel 2.6.8.1 rebuilded with the
> > >
> > > prism54 patch downloaded here
> > >
> > (http://prism54.org/pub/linux/snapshot/kernel/v2.6/2004-08/patch-2.6.8-prism54-cvs20040815.bz2).
> > >
> > > The problem are that the following message appears at boot time or with the
> > > commande dmesg.
> > >
> > > Loaded prism54 driver, version 1.2
> > > PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
> > > ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 12 (level, low) -> IRQ 12
> > > prism54: PCI device memory region not configured; fix your BIOS or CardBus
> > > bridge/drivers
> > > prism54: probe of 0000:02:00.0 failed with error -5
> >
> > What does `cardctl status` output
> 
> 
> Now I started cardmgr and the result is :
> 
> mozart:~# cardctl status
> Socket 0:
>   3.3V CardBus card
>   function 0: [ready]
> Socket 1:
>   no card

Try cardctl eject; rmmod prism54; cardctl insert; dmesg -c

-- 
GnuPG Key fingerprint = 113F B290 C6D2 0251 4D84  A34A 6ADD 4937 E20A 525E