[Prism54-devel] [Bug 114] New: prism54 problem with Netgear WG511 card: interface reset failure

[bugzilla-daemon at mcgrof.com]

http://prism54.org/cgi-bin/bugzilla/show_bug.cgi?id=114

           Summary: prism54 problem with Netgear WG511 card: interface reset
                    failure
           Product: prim54
           Version: 1.2
          Platform: PC
        OS/Version: Linux
            Status: NEW
          Severity: major
          Priority: P2
         Component: Device Driver
        AssignedTo: prism54-devel at prism54.org
        ReportedBy: rehmann at math.uni-bielefeld.de


`ifconfig eth2 up`
 results in:
 kernel: eth2: resetting device...
 kernel: eth2: uploading firmware...
 kernel: eth2: firmware version: 1.0.4.3
 kernel: eth2: firmware upload complete
 kernel: eth2: no 'reset complete' IRQ seen - retrying
 kernel: eth2: no 'reset complete' IRQ seen - retrying
 kernel: eth2: interface reset failure
 kernel: prism54: Your card/socket may be faulty, or IRQ line too busy :(

`uname -a`
Linux ada 2.6.9 #1 Sun Nov 7 16:42:28 CET 2004 i686 GNU/Linux
The driver was build with patch-2.6.9-prism54-cvs20041107.bz2
(which has an erroneous Makefile 
(# $Id: Makefile.k26,v 1.11 2004/11/05 14:47:56 mcgrof Exp $)
in linux/drivers/net/wireless/prism54: it refers to isl_wds.o, but no code for
that is provided, build was done without that.)

Further info:
`cat /proc/interrupts`
 11:      27090          XT-PIC  ohci1394, yenta, yenta, uhci_hcd, uhci_hcd,
Intel 82801CA-ICH3, eth0, eth2

`lspci -v`
0000:07:00.0 Network controller: Intersil Corporation Intersil ISL3890 [Prism
GT/Prism Duette] (rev 01)
        Subsystem: Netgear: Unknown device 4800
        Flags: bus master, medium devsel, latency 80, IRQ 11
        Memory at 41000000 (32-bit, non-prefetchable) [size=8K]
        Capabilities: [dc] Power Management version 1

Software version coming with card (WG511ICB.sys):
Version 2.4.6.0 built on Thu Mar 4 10:19:26 CET 2004 by inlbuild at tix

>>>No operation with the WG511 was possible.<<<



------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.