[Prism54-devel] [Bug 48] New: firmware's load fail

bugzilla-daemon@mcgrof.com bugzilla-daemon@mcgrof.com
Tue, 27 Jan 2004 23:05:19 +0000 (UTC)


http://prism54.org/cgi-bin/bugzilla/show_bug.cgi?id=48

           Summary: firmware's load fail
           Product: prim54
           Version: 1.0.2.2
          Platform: ia32
        OS/Version: All
            Status: NEW
          Severity: normal
          Priority: P1
         Component: Firmware
        AssignedTo: prism54-devel@prism54.org
        ReportedBy: nicotine@bonbon.net


Card: SMC2802W PCI recognized as "Network controller: Harris Semiconductor
D-Links DWL-g650 A1 (rev 01)" with lspci
Distro: gentoo
Kernel: 2.6.1 & 2.4.24

When loading prism54 module, the card is recognized but doesn't work:

-- dmesg output --
Loaded prism54 driver, version 1.0.2.2
eth1: prism54 driver detected card model: SMC2802W V2

-- iwconfig output --

eth1      NOT READY!  ESSID:""
          Mode:Managed  Channel:6  Access Point: 00:00:00:00:00:00
          Tx-Power=0 dBm   Sensitivity=0/200
          Retry min limit:0   RTS thr=0 B   Fragment thr=0 B
          Encryption key:off
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

If I up the interface:

[root@jam:~]# ifconfig eth1 10.0.5.1 netmask 255.255.255.128 up
SIOCSIFFLAGS: Resource temporarily unavailable
SIOCSIFFLAGS: Resource temporarily unavailable

-- syslog output --
Jan 28 00:04:49 jam eth1: islpci_open()
Jan 28 00:04:49 jam eth1: resetting device...
Jan 28 00:04:49 jam eth1: uploading firmware...
Jan 28 00:04:50 jam eth1: firmware uploaded done, now triggering reset...
Jan 28 00:04:51 jam eth1: device soft reset timed out
Jan 28 00:04:51 jam eth1: islpci_open()
Jan 28 00:04:51 jam eth1: resetting device...
Jan 28 00:04:51 jam eth1: uploading firmware...
Jan 28 00:04:51 jam eth1: firmware uploaded done, now triggering reset...
Jan 28 00:04:52 jam eth1: device soft reset timed out



------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.