[Prism54-devel] [Bug 54] New: Allnet0271 failed load firmware on PPC

[bugzilla-daemon@mcgrof.com]

http://prism54.org/cgi-bin/bugzilla/show_bug.cgi?id=54

           Summary: Allnet0271 failed load firmware on PPC
           Product: prim54
           Version: 1.0.2.2
          Platform: ppc
        OS/Version: Linux 2.4
            Status: NEW
          Severity: major
          Priority: P2
         Component: Firmware
        AssignedTo: prism54-devel@prism54.org
        ReportedBy: chris.ruehl@wiesbaden.vistec.net


Fail loading the firmware to Allnet0271 on my RS6000-B50/PPC

try prism-patch from 5.2.04
firmware 1.0.4.3

Kernel 2.4.24

blackrs:/usr/lib/hotplug/firmware# cat /proc/cpuinfo
processor       : 0
cpu             : 604r
clock           : 374MHz
revision        : 49.2 (pvr 0009 3102)
bogomips        : 373.55
machine         : CHRP IBM,7046-B50

blackrs:/usr/lib/hotplug/firmware# lspci
00:00.0 Host bridge: Motorola MPC106 [Grackle] (rev 40)
00:0b.0 ISA bridge: Symphony Labs W83C553 (rev 10)
00:0b.1 IDE interface: Symphony Labs SL82c105 (rev 05)
00:0c.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet LANCE]
(rev 26)
00:0d.0 Class ff00: IBM MPIC interrupt controller
00:10.0 SCSI storage controller: LSI Logic / Symbios Logic (formerly NCR) 53c875
(rev 04)
00:12.0 Network controller: Harris Semiconductor: Unknown device 3890 (rev 01)
00:16.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)


hostbridge
-----------------------
lspci -vvvv
00:00.0 Host bridge: Motorola MPC106 [Grackle] (rev 40)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ F-        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort+ >SER-        Latency: 0, cache line size 08

Allnet0271
-----------------------
lspci -vvvvn
00:12.0 Class 0280: 1260:3890 (rev 01)
        Subsystem: 16a5:1605
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ F-        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >S-        Latency: 80 (2500ns min,
7000ns max), cache line size 08
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at fcebe000 (32-bit, non-prefetchable) [size=8K]
        Capabilities: [dc] Power Management version 1
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

dmesg
----------------------------------------------------
Loaded prism54 driver, version 1.0.2.2
eth2: prism54 driver detected card model: PRISM Duette/GT
eth2: islpci_open()
eth2: resetting device...
eth2: uploading firmware...
eth2: firmware uploaded done, now triggering reset...
eth2: device soft reset timed out
eth2: device soft reset timed out
prism54: Your card/socket may be faulty, or IRQ line too busy :(

Outher NIC:
--------------------------------------------
pcnet32: PCnet/FAST 79C971 at 0xbff400, warning: CSR address invalid,
    using instead PROM address of 00 04 ac 97 64 9b
    tx_start_pt(0x0c00):~220 bytes, BCR18(68a1):BurstWrEn DWordIO NoUFlow
    SRAMSIZE=0x7f00, SRAM_BND=0x4000, assigned IRQ 22.
eth0: registered as PCnet/FAST 79C971
eth1: RealTek RTL-8029 found at 0xbff800, IRQ 17, 00:80:AD:41:B5:B9.


check firmware from the AllNet-CD WL54GT.ARM :-\ but same failure

greets
chris



------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.