[Prism54-devel] Re: [Prism54-users] RE: Xterasys XG-600 and Linux -- mcgrof says: How to add a new PCIID

[Luis R. Rodriguez]

Actually this is probably not really the PCI ID and it may already have
support, please reply back with your lspci -n output

	Luis

On Tue, 28 Oct 2003, Luis R. Rodriguez wrote:

>
> OK, confirmed, I will add support.
> 	Luis
>
> On Tue, 28 Oct 2003, Lane Inman wrote:
>
> >
> > Thank you for your response;
> >
> > The specs on this card are as follows:
> >   http://www.xterasys.com/sxg600.htm
> >
> > This says that it uses the Prism GT chipset, interestingly in the 2.4.21
> > kernel this pci id is listed as a Dlink 650G
> > -----Original Message-----
> > From:	Luis R. Rodriguez [mailto:mcgrof@ruslug.rutgers.edu]
> > Sent:	Tue 10/28/2003 9:58 AM
> > To:	Lane Inman
> > Cc:	prism54-devel@prism54.org
> > Subject:	Re: Xterasys XG-600 and Linux -- mcgrof says: How to add a
> > new PCIID
> >
> > That PCI ID is not supported. If for sure you know it does use one of the
> > prism54 chipset let us know and we will add support. If you want to take
> > the risk and try to see if it works with the driver off bat, you can just
> > add support yourself. You can see how to do this by reading on the old
> > package:
> >
> > ISL3890-0.1.0/applied-patches/3com-6001.patch
> >
> > You can modify that file, save that file to say, xg600-17cf-0014.patch and
> > then just apply it.
> >
> > You subscribe to prism54-users@prism54.org ;)
> > 	Luis
> >
> > On Tue, 28 Oct 2003, Lane Inman wrote:
> >
> > > FYI -
> > >   I have a Xterasys XG-600 which I am trying to get to work with no luck,
> > > however the lspci is:
> > >
> > > 17cf:0014
> > >
> > > This is on RH9...  do you guys have any luck with this version??
> > >
> > > -Lane
> > >
> >
> >
> >
> >
> >
>
> _______________________________________________
> Prism54-users mailing list
> Prism54-users@prism54.org
> http://prism54.org/mailman/listinfo/prism54-users
>